|
|
Now to remove the top part, fish around under the lip on the rear for a platic tab, it will be right in the middle.
Push it in and up, it should come up like in these pictures 
That will expose these two screws, remove them and lift on that support bar to take the top off. 
Then to take off the "skirt". Turn what you have left over and stand it on its head, and find the two lift tabs on one side. lift those tabs with a pair of flathead screwdrivers, then take a smaller flathead and wedge the metal in the 4 holes outward just a little bit. 
It should slip off the plastic, leaving the skirt loose. Make sure you unplugged the 2-prong cable connecting the skirt to the chassis. Pull up lightly on the skirt, it should come right up. Remove this metal plate covering the "moosehead board" and take out all the screws to remove the board. 
|